Files
@ bd21c8aa7237
Branch filter:
Location: vmkdrivers/vmkdrivers/src_92/drivers/usb/core/pci-quirks.c
bd21c8aa7237
22.3 KiB
text/x-csrc
ESXi-6.0.0b
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 | /*
* This file contains code to reset and initialize USB host controllers.
* Some of it includes work-arounds for PCI hardware and BIOS quirks.
* It may need to run early during booting -- before USB would normally
* initialize -- to ensure that Linux doesn't use any legacy modes.
*
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
* (and others)
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#if !defined(__VMKLNX__)
#include <linux/acpi.h>
#endif
#include "pci-quirks.h"
#if defined(__VMKLNX__)
#include "../host/xhci/xhci-ext-caps.h"
#else
#include "xhci-ext-caps.h"
#endif
#if defined(__VMKLNX__)
inline void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
{
/*
* Make sure the BAR is actually a memory resource, not an IO resource
*/
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
WARN_ON(1);
return NULL;
}
return ioremap_nocache(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
}
#endif
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
#define UHCI_USBCMD 0 /* command register */
#define UHCI_USBINTR 4 /* interrupt register */
#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
#define OHCI_CONTROL 0x04
#define OHCI_CMDSTATUS 0x08
#define OHCI_INTRSTATUS 0x0c
#define OHCI_INTRENABLE 0x10
#define OHCI_INTRDISABLE 0x14
#define OHCI_FMINTERVAL 0x34
#define OHCI_HCFS (3 << 6) /* hc functional state */
#define OHCI_HCR (1 << 0) /* host controller reset */
#define OHCI_OCR (1 << 3) /* ownership change request */
#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
#define OHCI_INTR_OC (1 << 30) /* ownership change */
#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
#define EHCI_USBCMD 0 /* command register */
#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
#define EHCI_USBSTS 4 /* status register */
#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
#define EHCI_USBINTR 8 /* interrupt register */
#define EHCI_CONFIGFLAG 0x40 /* configured flag register */
#define EHCI_USBLEGSUP 0 /* legacy support register */
#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
#define AB_REG_BAR_SB700 0xf0
#define AB_INDX(addr) ((addr) + 0x00)
#define AB_DATA(addr) ((addr) + 0x04)
#define AX_INDXC 0x30
#define AX_DATAC 0x34
#define NB_PCIE_INDX_ADDR 0xe0
#define NB_PCIE_INDX_DATA 0xe4
#define PCIE_P_CNTL 0x10040
#define BIF_NB 0x10002
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
static struct amd_chipset_info {
struct pci_dev *nb_dev;
struct pci_dev *smbus_dev;
int nb_type;
int sb_type;
int isoc_reqs;
int probe_count;
int probe_result;
} amd_chipset;
static DEFINE_SPINLOCK(amd_lock);
int usb_amd_find_chipset_info(void)
{
u8 rev = 0;
unsigned long flags;
struct amd_chipset_info info;
int ret;
spin_lock_irqsave(&amd_lock, flags);
/* probe only once */
if (amd_chipset.probe_count > 0) {
amd_chipset.probe_count++;
spin_unlock_irqrestore(&amd_lock, flags);
return amd_chipset.probe_result;
}
memset(&info, 0, sizeof(info));
spin_unlock_irqrestore(&amd_lock, flags);
info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
if (info.smbus_dev) {
rev = info.smbus_dev->revision;
if (rev >= 0x40)
info.sb_type = 1;
else if (rev >= 0x30 && rev <= 0x3b)
info.sb_type = 3;
} else {
info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
0x780b, NULL);
if (!info.smbus_dev) {
ret = 0;
goto commit;
}
rev = info.smbus_dev->revision;
if (rev >= 0x11 && rev <= 0x18)
info.sb_type = 2;
}
if (info.sb_type == 0) {
if (info.smbus_dev) {
pci_dev_put(info.smbus_dev);
info.smbus_dev = NULL;
}
ret = 0;
goto commit;
}
info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
if (info.nb_dev) {
info.nb_type = 1;
} else {
info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
if (info.nb_dev) {
info.nb_type = 2;
} else {
info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
0x9600, NULL);
if (info.nb_dev)
info.nb_type = 3;
}
}
ret = info.probe_result = 1;
printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
commit:
spin_lock_irqsave(&amd_lock, flags);
if (amd_chipset.probe_count > 0) {
/* race - someone else was faster - drop devices */
/* Mark that we where here */
amd_chipset.probe_count++;
ret = amd_chipset.probe_result;
spin_unlock_irqrestore(&amd_lock, flags);
if (info.nb_dev)
pci_dev_put(info.nb_dev);
if (info.smbus_dev)
pci_dev_put(info.smbus_dev);
} else {
/* no race - commit the result */
info.probe_count++;
amd_chipset = info;
spin_unlock_irqrestore(&amd_lock, flags);
}
return ret;
}
EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
/*
* The hardware normally enables the A-link power management feature, which
* lets the system lower the power consumption in idle states.
*
* This USB quirk prevents the link going into that lower power state
* during isochronous transfers.
*
* Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
* some AMD platforms may stutter or have breaks occasionally.
*/
static void usb_amd_quirk_pll(int disable)
{
u32 addr, addr_low, addr_high, val;
u32 bit = disable ? 0 : 1;
unsigned long flags;
spin_lock_irqsave(&amd_lock, flags);
if (disable) {
amd_chipset.isoc_reqs++;
if (amd_chipset.isoc_reqs > 1) {
spin_unlock_irqrestore(&amd_lock, flags);
return;
}
} else {
amd_chipset.isoc_reqs--;
if (amd_chipset.isoc_reqs > 0) {
spin_unlock_irqrestore(&amd_lock, flags);
return;
}
}
if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) {
outb_p(AB_REG_BAR_LOW, 0xcd6);
addr_low = inb_p(0xcd7);
outb_p(AB_REG_BAR_HIGH, 0xcd6);
addr_high = inb_p(0xcd7);
addr = addr_high << 8 | addr_low;
outl_p(0x30, AB_INDX(addr));
outl_p(0x40, AB_DATA(addr));
outl_p(0x34, AB_INDX(addr));
val = inl_p(AB_DATA(addr));
} else if (amd_chipset.sb_type == 3) {
pci_read_config_dword(amd_chipset.smbus_dev,
AB_REG_BAR_SB700, &addr);
outl(AX_INDXC, AB_INDX(addr));
outl(0x40, AB_DATA(addr));
outl(AX_DATAC, AB_INDX(addr));
val = inl(AB_DATA(addr));
} else {
spin_unlock_irqrestore(&amd_lock, flags);
return;
}
if (disable) {
val &= ~0x08;
val |= (1 << 4) | (1 << 9);
} else {
val |= 0x08;
val &= ~((1 << 4) | (1 << 9));
}
outl_p(val, AB_DATA(addr));
if (!amd_chipset.nb_dev) {
spin_unlock_irqrestore(&amd_lock, flags);
return;
}
if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
addr = PCIE_P_CNTL;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_ADDR, addr);
pci_read_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, &val);
val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
val |= bit | (bit << 3) | (bit << 12);
val |= ((!bit) << 4) | ((!bit) << 9);
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, val);
addr = BIF_NB;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_ADDR, addr);
pci_read_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, &val);
val &= ~(1 << 8);
val |= bit << 8;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, val);
} else if (amd_chipset.nb_type == 2) {
addr = NB_PIF0_PWRDOWN_0;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_ADDR, addr);
pci_read_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, &val);
if (disable)
val &= ~(0x3f << 7);
else
val |= 0x3f << 7;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, val);
addr = NB_PIF0_PWRDOWN_1;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_ADDR, addr);
pci_read_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, &val);
if (disable)
val &= ~(0x3f << 7);
else
val |= 0x3f << 7;
pci_write_config_dword(amd_chipset.nb_dev,
NB_PCIE_INDX_DATA, val);
}
spin_unlock_irqrestore(&amd_lock, flags);
return;
}
void usb_amd_quirk_pll_disable(void)
{
usb_amd_quirk_pll(1);
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
void usb_amd_dev_put(void)
{
struct pci_dev *nb, *smbus;
unsigned long flags;
spin_lock_irqsave(&amd_lock, flags);
amd_chipset.probe_count--;
if (amd_chipset.probe_count > 0) {
spin_unlock_irqrestore(&amd_lock, flags);
return;
}
/* save them to pci_dev_put outside of spinlock */
nb = amd_chipset.nb_dev;
smbus = amd_chipset.smbus_dev;
amd_chipset.nb_dev = NULL;
amd_chipset.smbus_dev = NULL;
amd_chipset.nb_type = 0;
amd_chipset.sb_type = 0;
amd_chipset.isoc_reqs = 0;
amd_chipset.probe_result = 0;
spin_unlock_irqrestore(&amd_lock, flags);
if (nb)
pci_dev_put(nb);
if (smbus)
pci_dev_put(smbus);
}
EXPORT_SYMBOL_GPL(usb_amd_dev_put);
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
*/
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
{
/* Turn off PIRQ enable and SMI enable. (This also turns off the
* BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
*/
pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
/* Reset the HC - this will force us to get a
* new notification of any already connected
* ports due to the virtual disconnect that it
* implies.
*/
outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
mb();
udelay(5);
if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
/* Just to be safe, disable interrupt requests and
* make sure the controller is stopped.
*/
outw(0, base + UHCI_USBINTR);
outw(0, base + UHCI_USBCMD);
}
EXPORT_SYMBOL_GPL(uhci_reset_hc);
/*
* Initialize a controller that was newly discovered or has just been
* resumed. In either case we can't be sure of its previous state.
*
* Returns: 1 if the controller was reset, 0 otherwise.
*/
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
{
u16 legsup;
unsigned int cmd, intr;
/*
* When restarting a suspended controller, we expect all the
* settings to be the same as we left them:
*
* PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
* Controller is stopped and configured with EGSM set;
* No interrupts enabled except possibly Resume Detect.
*
* If any of these conditions are violated we do a complete reset.
*/
pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
__func__, legsup);
goto reset_needed;
}
cmd = inw(base + UHCI_USBCMD);
if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
!(cmd & UHCI_USBCMD_EGSM)) {
dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
__func__, cmd);
goto reset_needed;
}
intr = inw(base + UHCI_USBINTR);
if (intr & (~UHCI_USBINTR_RESUME)) {
dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
__func__, intr);
goto reset_needed;
}
return 0;
reset_needed:
dev_dbg(&pdev->dev, "Performing full reset\n");
uhci_reset_hc(pdev, base);
return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
u16 cmd;
return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
}
#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
unsigned long base = 0;
int i;
if (!pio_enabled(pdev))
return;
for (i = 0; i < PCI_ROM_RESOURCE; i++)
if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
base = pci_resource_start(pdev, i);
break;
}
if (base)
uhci_check_and_reset_hc(pdev, base);
}
static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
{
return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
}
static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
{
void __iomem *base;
u32 control;
u32 fminterval;
int cnt;
if (!mmio_resource_enabled(pdev, 0))
return;
base = pci_ioremap_bar(pdev, 0);
if (base == NULL)
return;
control = readl(base + OHCI_CONTROL);
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
#ifdef __hppa__
#define OHCI_CTRL_MASK (OHCI_CTRL_RWC | OHCI_CTRL_IR)
#else
#define OHCI_CTRL_MASK OHCI_CTRL_RWC
if (control & OHCI_CTRL_IR) {
int wait_time = 500; /* arbitrary; 5 seconds */
writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
writel(OHCI_OCR, base + OHCI_CMDSTATUS);
while (wait_time > 0 &&
readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
wait_time -= 10;
msleep(10);
}
if (wait_time <= 0)
dev_warn(&pdev->dev, "OHCI: BIOS handoff failed"
" (BIOS bug?) %08x\n",
readl(base + OHCI_CONTROL));
}
#endif
/* disable interrupts */
writel((u32) ~0, base + OHCI_INTRDISABLE);
/* Reset the USB bus, if the controller isn't already in RESET */
if (control & OHCI_HCFS) {
/* Go into RESET, preserving RWC (and possibly IR) */
writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
readl(base + OHCI_CONTROL);
/* drive bus reset for at least 50 ms (7.1.7.5) */
msleep(50);
}
/* software reset of the controller, preserving HcFmInterval */
fminterval = readl(base + OHCI_FMINTERVAL);
writel(OHCI_HCR, base + OHCI_CMDSTATUS);
/* reset requires max 10 us delay */
for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
break;
udelay(1);
}
writel(fminterval, base + OHCI_FMINTERVAL);
/* Now the controller is safely in SUSPEND and nothing can wake it up */
iounmap(base);
}
static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
void __iomem *op_reg_base,
u32 cap, u8 offset)
{
int msec, tried_handoff = 0;
if (cap & EHCI_USBLEGSUP_BIOS) {
dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
#if 0
/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
* but that seems dubious in general (the BIOS left it off intentionally)
* and is known to prevent some systems from booting. so we won't do this
* unless maybe we can determine when we're on a system that needs SMI forced.
*/
/* BIOS workaround (?): be sure the pre-Linux code
* receives the SMI
*/
pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val);
pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE);
#endif
/* some systems get upset if this semaphore is
* set for any other reason than forcing a BIOS
* handoff..
*/
pci_write_config_byte(pdev, offset + 3, 1);
}
/* if boot firmware now owns EHCI, spin till it hands it over. */
msec = 1000;
while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
tried_handoff = 1;
msleep(10);
msec -= 10;
pci_read_config_dword(pdev, offset, &cap);
}
if (cap & EHCI_USBLEGSUP_BIOS) {
/* well, possibly buggy BIOS... try to shut it down,
* and hope nothing goes too wrong
*/
dev_warn(&pdev->dev, "EHCI: BIOS handoff failed"
" (BIOS bug?) %08x\n", cap);
pci_write_config_byte(pdev, offset + 2, 0);
}
/* just in case, always disable EHCI SMIs */
pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0);
/* If the BIOS ever owned the controller then we can't expect
* any power sessions to remain intact.
*/
if (tried_handoff)
writel(0, op_reg_base + EHCI_CONFIGFLAG);
}
static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
{
void __iomem *base, *op_reg_base;
u32 hcc_params, cap, val;
u8 offset, cap_length;
int wait_time, delta, count = 256/4;
if (!mmio_resource_enabled(pdev, 0))
return;
base = pci_ioremap_bar(pdev, 0);
if (base == NULL)
return;
cap_length = readb(base);
op_reg_base = base + cap_length;
/* EHCI 0.96 and later may have "extended capabilities"
* spec section 5.1 explains the bios handoff, e.g. for
* booting from USB disk or using a usb keyboard
*/
hcc_params = readl(base + EHCI_HCC_PARAMS);
offset = (hcc_params >> 8) & 0xff;
while (offset && --count) {
pci_read_config_dword(pdev, offset, &cap);
switch (cap & 0xff) {
case 1:
ehci_bios_handoff(pdev, op_reg_base, cap, offset);
break;
case 0: /* Illegal reserved cap, set cap=0 so we exit */
cap = 0; /* then fallthrough... */
default:
dev_warn(&pdev->dev, "EHCI: unrecognized capability "
"%02x\n", cap & 0xff);
}
offset = (cap >> 8) & 0xff;
}
if (!count)
dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n");
/*
* halt EHCI & disable its interrupts in any case
*/
val = readl(op_reg_base + EHCI_USBSTS);
if ((val & EHCI_USBSTS_HALTED) == 0) {
val = readl(op_reg_base + EHCI_USBCMD);
val &= ~EHCI_USBCMD_RUN;
writel(val, op_reg_base + EHCI_USBCMD);
wait_time = 2000;
delta = 100;
do {
writel(0x3f, op_reg_base + EHCI_USBSTS);
udelay(delta);
wait_time -= delta;
val = readl(op_reg_base + EHCI_USBSTS);
if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
break;
}
} while (wait_time > 0);
}
writel(0, op_reg_base + EHCI_USBINTR);
writel(0x3f, op_reg_base + EHCI_USBSTS);
iounmap(base);
return;
}
/*
* handshake - spin reading a register until handshake completes
* @ptr: address of hc register to be read
* @mask: bits to look at in result of read
* @done: value of those bits when handshake succeeds
* @wait_usec: timeout in microseconds
* @delay_usec: delay in microseconds to wait between polling
*
* Polls a register every delay_usec microseconds.
* Returns 0 when the mask bits have the value done.
* Returns -ETIMEDOUT if this condition is not true after
* wait_usec microseconds have passed.
*/
static int handshake(void __iomem *ptr, u32 mask, u32 done,
int wait_usec, int delay_usec)
{
u32 result;
do {
result = readl(ptr);
result &= mask;
if (result == done)
return 0;
udelay(delay_usec);
wait_usec -= delay_usec;
} while (wait_usec > 0);
return -ETIMEDOUT;
}
/**
* PCI Quirks for xHCI.
*
* Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
* It signals to the BIOS that the OS wants control of the host controller,
* and then waits 5 seconds for the BIOS to hand over control.
* If we timeout, assume the BIOS is broken and take control anyway.
*/
static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
{
void __iomem *base;
int ext_cap_offset;
void __iomem *op_reg_base;
u32 val;
int timeout;
int len = pci_resource_len(pdev, 0);
if (!mmio_resource_enabled(pdev, 0))
return;
base = ioremap_nocache(pci_resource_start(pdev, 0), len);
if (base == NULL)
return;
/*
* Find the Legacy Support Capability register -
* this is optional for xHCI host controllers.
*/
ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
do {
if ((ext_cap_offset + sizeof(val)) > len) {
/* We're reading garbage from the controller */
dev_warn(&pdev->dev,
"xHCI controller failing to respond");
return;
}
if (!ext_cap_offset)
/* We've reached the end of the extended capabilities */
goto hc_init;
val = readl(base + ext_cap_offset);
if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
break;
ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset);
} while (1);
/* If the BIOS owns the HC, signal that the OS wants it, and wait */
if (val & XHCI_HC_BIOS_OWNED) {
writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
/* Wait for 5 seconds with 10 microsecond polling interval */
timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
0, 5000, 10);
/* Assume a buggy BIOS and take HC ownership anyway */
if (timeout) {
dev_warn(&pdev->dev, "xHCI BIOS handoff failed"
" (BIOS bug ?) %08x\n", val);
writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
}
}
val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
/* Mask off (turn off) any enabled SMIs */
val &= XHCI_LEGACY_DISABLE_SMI;
/* Mask all SMI events bits, RW1C */
val |= XHCI_LEGACY_SMI_EVENTS;
/* Disable any BIOS SMIs and clear all SMI events*/
writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
hc_init:
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
/* Wait for the host controller to be ready before writing any
* operational or runtime registers. Wait 5 seconds and no more.
*/
timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
5000, 10);
/* Assume a buggy HC and start HC initialization anyway */
if (timeout) {
val = readl(op_reg_base + XHCI_STS_OFFSET);
dev_warn(&pdev->dev,
"xHCI HW not ready after 5 sec (HC bug?) "
"status = 0x%x\n", val);
}
/* Send the halt and disable interrupts command */
val = readl(op_reg_base + XHCI_CMD_OFFSET);
val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
writel(val, op_reg_base + XHCI_CMD_OFFSET);
/* Wait for the HC to halt - poll every 125 usec (one microframe). */
timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
XHCI_MAX_HALT_USEC, 125);
if (timeout) {
val = readl(op_reg_base + XHCI_STS_OFFSET);
dev_warn(&pdev->dev,
"xHCI HW did not halt within %d usec "
"status = 0x%x\n", XHCI_MAX_HALT_USEC, val);
}
iounmap(base);
}
#if defined(__VMKLNX__)
void quirk_usb_early_handoff(struct pci_dev *pdev)
#else
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
#endif
{
if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
return;
if (pci_enable_device(pdev) < 0) {
dev_warn(&pdev->dev, "Can't enable PCI device, "
"BIOS handoff failed.\n");
return;
}
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
quirk_usb_handoff_ohci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
quirk_usb_disable_ehci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
pci_disable_device(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
|